Takeoff Properties
Property Name | Description |
---|---|
Angle | <angle value> between 0° and 90° |
Center Offset | <numeric value> |
Center To Top Distance | <numeric value> |
Connection | End Type | fl -<numeric value>
m -<numeric value>
fe -<numeric value>
Separate End Type entries for each End Spec with a semi colon. Example: fl-2;fe-.13 creates a flange at End1 with size 2, and a female connection at End2 with an overall reduction of component's dimensions of .13 |
Connection 1 | Length (L1) | Positive <numeric value> |
Damper | Angle | <angle value> between 0° and 90° With Damper property must be set to true for Damper Angle property to be activated. |
Damper | Offset | <numeric value>
With Damper property must be set to true for Damper Angle property to be activated. Limited by Joint Size property. |
Incline Angle | <angle value> between 10° and 90° |
Inline Length | Positive <numeric value> |
Joint Size | Positive <numeric value> |
Radius 1 (R1) | <numeric value> |
Radius 2 (R2) | <numeric value> |
Rise | <numeric value> |
Run | <numeric value> |
Saddle Length | <numeric value> |
Saddle Size | <numeric value> |
Offset Options |
<null value> s inset= <numeric value>:<numeric value> |
Take Off Joint Type |
|
With Damper |
|
Property Option menus are available to assist in making some property entries.